KOMATSU PC210 LC-11
- Share
Year
2024
Manufacturer
Komastu
Model
PC210 LC-11
Condition
New
Location
Ontario
Designed to improve your productivity, the PC210LC-11 is a mid-size hydraulic excavator with enhanced engine and hydraulic pump control logic that improves multi-function speed.
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Engine
| Model | Komatsu SAA6D107E-3* |
| Type | Water-cooled, 4-cycle, direct injection |
| Aspiration | Komatsu Variable Geometry Turbocharged, aftercooled, cooled EGR |
| Number of cylinders | 6 |
| Bore | 4.21 in |
| Stroke | 4.88 in |
| Piston displacement | 408 in³ |
| Horsepower: | |
| ISO 9249 / SAE J1349 - Net | 165 HP |
| Fan at maximum speed - Net | 159 HP |
| Rated rpm | 2,000 rpm |
| Fan drive method for radiator cooling | Mechanical with viscous fan clutch |
| Governor | All-speed control, electronic |
| *EPA Tier 4 Final emissions certified |
Hydraulics
Type: HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
| Number of selectable working modes | 6 |
| Main pump: | |
| Type | Variable displacement piston type |
| Pumps for | Boom, arm, bucket, swing, and travel circuits |
| Maximum flow | 125.5 US gpm |
| Supply for control circuit | Self-reducing valve |
| Hydraulic motors: | |
| Travel | 2 x axial piston motors with parking brake |
| Swing | 1 x axial piston motor with swing holding brake |
| Relief valve setting: | |
| Implement circuits | 5,400 psi |
| Travel circuit | 5,400 psi |
| Swing circuit | 4,190 psi |
| Pilot circuit | 470 psi |
| Hydraulic cylinders: | |
| Number of cylinders | Bore x Stroke x Rod Diameter |
| Boom / 2 | 5.1 x 52.5 x 3.5 in |
| Arm / 1 | 5.3 x 58.7 x 3.7 in |
| Bucket / 1 | 4.5 x 44.1 x 3.2 in |
Drives and Brakes
| Steering control | Two levers with pedals |
| Drive method | Hydrostatic |
| Maximum drawbar pull | 45,349 lbs. |
| Gradeability | 70%, 35° |
| Maximum travel speed: (Auto-Shift) | |
| High | 3.4 mph |
| Mid | 2.5 mph |
| Low | 1.9 mph |
| Service brake | Hydraulic lock |
| Parking brake | Mechanical disc brake |
Swing System
| Drive method | Hydrostatic |
| Swing reduction | Planetary gear |
| Swing circle lubrication | Grease-bathed |
| Service brake | Hydraulic lock |
| Holding brake/Swing lock | Mechanical disc brake |
| Swing speed | 12.4 rpm |
| Swing torque | 49,907 ft.-lbs. |
Undercarriage
| Center frame | X-frame | |
| Track frame | Box-section | |
| Seal of track | Sealed track | |
| Track adjuster | Hydraulic | |
| Number of shoes | 49 each side | |
| Number of carrier rollers | 2 each side | |
| Number of track rollers | 9 each side |
Coolant & Lubricant Capacity (Refilling)
| Fuel tank | 105.7 US gal |
| Coolant | 8.1 US gal |
| Engine | 6.1 US gal |
| Final drive, each side | 1.3 US gal |
| Swing drive | 1.7 US gal |
| Hydraulic tank | 34.9 US gal |
| Hydraulic system | 61.8 US gal |
| DEF tank | 6.1 US gal |
Operating Weight (Approximate)
Operating weight includes 18 ft. 8 in one-piece boom, 9 ft. 7 in arm, SAE heaped 1.57 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
| Triple-Grouser Shoes | Operating Weight: | Ground Pressure |
| 28 in | 53,265 lbs. | 6.7 psi |
| 31.5 in | 53,882 lbs. | 5.9 psi |
Sound Performance
| Exterior – ISO 6395 | 100 dB(A) |
| Operator – ISO 6396 | 66 dB(A) |
- 3 Speed travel with Auto shift
- Alternator, 90 Ampere, 24V
- AM/FM radio
- Automatic engine warm-up system
- Automatic air conditioner/heater
- Auto idle
- Auto Idle Shutdown (programmable)
- Lever lock Auto-lock
- Auxiliary input (3.5 mm jack)
- Batteries, large capacity
- Battery disconnect switch
- Boom and arm holding valves
- Carrier rollers (2 each side)
- Converter, (2) x 12V
- Counterweight, 9,634 lb
- Dry type air cleaner, double element
- Electric horn
- EMMS monitoring system
- Engine, Komatsu SAA6D107E-3
- Extended work equipment grease interval
- Fan guard structure
- Fuel system pre-cleaner 10 micron
- High back air suspension seat, with heat
- Hydraulic track adjusters
- KOMTRAX® Level 5.0
- Large LCD color monitor, high resolution
- Lock lever
- Mirrors, (LH and RH)
- Operator Protective Top Guard (OPG), Level 1
- Operator Identification System
- Pattern change valve (ISO to BH control)
- Power maximizing system
- PPC hydraulic control system
- Pump/engine room partition cover
- Radiator and oil cooler dustproof net
- Rear reflectors
- Rearview monitoring system (1 camera)
- Revolving frame deck guard
- Revolving frame undercovers
- ROPS cab
- Seat belt, retractable, 3"
- Seat belt indicator
- Secondary engine shutoff switch
- Service valve
- Shoes, triple grouser, 31.5"
- Skylight
- Slip resistant foot plates
- Starter motor, 5.5kW/24V x 1
- Suction fan
- Thermal and fan guards
- Track frame undercover
- Track frame swivel guard
- Travel alarm
- Working lights, 2 (boom and RH front)
- Working mode selection system
- Arms
– 9'7" HD arm assembly
– 9'7" HD arm assembly with piping - Booms
– 18'8" boom assembly
– 18'8" HD boom assembly with piping - Cab guards
– Full front guard, OPG Level 1
– Full front guard, OPG Level 2
– Bolt-on top guard, OPG Level 2
– Lower front window guard - High pressure in-line hydraulic filters
- Hydraulic control unit, 1 actuator
- Rain visor
- Revolving frame undercovers, heavy duty
- Shoes, triple grouser, 28"
- Sun visor
- Straight travel pedal
- Track roller guards, full length
- Working light, front, one additional
SUPPORT YOU CAN COUNT ON
MY KOMATSU
Access and manage all your machine telematics data, parts manuals, service manuals, software and parts ordering information from a single source anywhere, anytime.
Financing
Financing can be a major advantage for your operation, enabling you to get the equipment and service you need with terms to fit your balance sheet. Take advantage of competitive and flexible financial tools with Komatsu financing.
Warranty Programs
Experience the peace of mind that comes with Komatsu’s warranty. Komatsu offers a standard warranty on all machines — plus extended coverage options that help extend the life of your investment.