KOMATSU PC240 LC-11
- Share
Year
2024
Manufacturer
Komastu
Model
PC240 LC-11
Condition
New
Location
Ontario
Quick response and smooth operation to maximize your work. The PC240LC-11 is a mid-size hydraulic excavator designed to offer extended dig depth and reach for most utility applications.
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Large high-strength steel castings on the boom, arm and bucket link
Closed-center load-sensing hydraulics for precise, fine control
Large displacement high-efficiency pumps provide optimal attachment flow
Large, spacious, quiet cab featuring standard air suspension seat
Engine
| Model | Komatsu SAA6D107E-3* |
| Type | Water-cooled, 4-cycle, direct injection |
| Aspiration | Turbocharged, aftercooled, cooled EGR |
| Number of cylinders | 6 |
| Bore | 4.21 in |
| Stroke | 4.88 in |
| Piston displacement | 408 in³ |
| Horsepower | |
| SAE J1995 : Gross | 189 HP |
| ISO 9249/SAE J1349 : Net | 177 HP |
| Rated rpm | 2,000 rpm |
| Fan drive type | Mechanical |
| Governor | All-speed control, electronic |
| *EPA Tier 4 Final emissions certified |
Hydraulics
Type: HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
| Number of selectable working modes | 6 |
| Main pump: | |
| Type | Variable displacement piston type |
| Pumps for | Boom, arm, bucket, swing, and travel circuits |
| Maximum flow | 125.5 US gpm |
| Supply for control circuit | Self-reducing valve |
| Hydraulic motors: | |
| Travel | 2 x axial piston motor with parking brake |
| Swing | 1 x axial piston motor with swing holding brake |
| Relief valve setting: | |
| Implement circuits | 5,400 psi |
| Travel circuit | 5,400 psi |
| Swing circuit | 4,190 psi |
| Pilot circuit | 470 psi |
| Hydraulic cylinders: | |
| Number of cylinders | Bore x Stroke x Rod Diameter |
| Boom / 2 | 5.3 x 52.6 x 3.5 in |
| Arm / 1 | 5.5 x 64.4 x 3.9 in |
| Bucket / 1 | 5.1 x 40.2 x 3.5 in |
Drives and Brakes
| Steering control | Two levers with pedals |
| Drive method | Hydrostatic |
| Maximum drawbar pull | 45,349 lbs. |
| Gradeability | 70%, 35° |
| Maximum travel speed: (Auto-Shift) | |
| High | 3.4 mph |
| Mid | 2.5 mph |
| Low | 1.9 mph |
| Service brake | Hydraulic lock |
| Parking brake | Mechanical disc brake |
Swing System
| Drive method | Hydrostatic |
| Swing reduction | Planetary gear |
| Swing circle lubrication | Grease-bathed |
| Service brake | Hydraulic lock |
| Holding brake/Swing lock | Mechanical disc brake |
| Swing speed | 11.7 rpm |
| Swing torque | 58,334 ft.-lbs. |
Undercarriage
| Center frame | X-frame |
| Track frame | Box-section |
| Seal of track | Sealed track |
| Track adjuster | Hydraulic |
| Number of shoes | 51 each side |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 10 each side |
Coolant & Lubricant Capacity (Refilling)
| Fuel tank | 105.7 US gal |
| Coolant | 10 US gal |
| Engine | 6.1 US gal |
| Final drive, each side | 1.3 US gal |
| Swing drive | 1.9 US gal |
| Hydraulic tank | 34.9 US gal |
| Hydraulic system | 64.4 US gal |
| DEF tank | 10.4 US gal |
Operating Weight (Approximate)
Operating weight, including 19 ft. 2 in one-piece boom, 10 ft. 0 in arm, SAE heaped 1.85 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
| Triple-Grouser Shoes | 28 in |
| Operating Weight | 55,763 lbs. |
| Ground Pressure | 6.68 psi |
| Triple-Grouser Shoes | 31.5' in |
| Operating Weight: | 56,380 lbs. |
| Ground Pressure | 5.91 psi |
| Component Weights | |
| Arm including bucket cylinder and linkage: | |
| 10 ft. 0 in arm assembly | 2,694 lbs. |
| 10 ft. 0 in HD arm assembly | 2,906 lbs. |
| 11 ft. 6 in arm assembly | 3,179 lbs. |
| One piece boom including arm cylinder: | |
| 20 ft. 2 in boom assembly | 4,892 lbs. |
| 20 ft. 2 in HD boom assembly | 5,126 lbs. |
| Boom cylinders x 2 | 463 lbs. |
| Counterweight | 10,296 lbs. |
| 1.85 yd³ bucket - 48 in width | 2,400 lbs. |
Sound Performance
| Exterior – ISO 6395 | 103 dB(A) |
| Operator – ISO 6396 | 70 dB(A) |
- 3 Speed travel with Auto shift
- Alternator, 90 Ampere, 24V
- AM/FM radio
- Automatic engine warm-up system
- Automatic air conditioner/heater
- Auto idle
- Auto Idle Shutdown (programmable)
- Lever lock Auto-lock
- Auxiliary input (3.5 mm jack)
- Batteries, large capacity
- Battery disconnect switch
- Boom and arm holding valves
- Carrier rollers (2 each side)
- Converter, (2) x 12V
- Counterweight, 10,296 lb
- Dry type air cleaner, double element
- Electric horn
- EMMS monitoring system
- Engine, Komatsu SAA6D107E-3
- Extended work equipment grease interval
- Fan guard structure
- Fuel system pre-cleaner 10 micron
- High back air suspension seat, with heat
- Hydraulic track adjusters
- KOMTRAX® Level 5.0
- Large LCD color monitor, high resolution
- Lock lever
- Mirrors, (LH and RH)
- Operator Protective Top Guard (OPG), Level 1
- Operator Identification System
- Pattern change valve (ISO to BH control)
- Power maximizing system
- PPC hydraulic control system
- Pump/engine room partition cover
- Radiator and oil cooler dustproof net
- Rear reflectors
- Rearview monitoring system (1 camera)
- Revolving frame deck guard
- Revolving frame undercovers
- ROPS cab
- Seat belt, retractable, 3"
- Seat belt indicator
- Secondary engine shutoff switch
- Service valve
- Shoes, triple grouser, 31.5"
- Skylight
- Slip resistant foot plates
- Starter motor, 5.5kW/24V x 1
- Suction fan
- Thermal and fan guards
- Track frame undercover
- Track frame swivel guard
- Travel alarm
- Working lights, 2 (boom and RH front)
- Working mode selection system
- Arms
– 10'0" arm assembly
– 10'0" HD arm assembly with piping
– 11'6" arm assembly - Booms
– 19'2" boom assembly
– 19'2" HD boom assembly with piping - Cab guards
– Full front guard, OPG Level 1
– Full front guard, OPG Level 2
– Bolt-on top guard, OPG Level 2
– Lower front window guard - High pressure in-line hydraulic filters
- Hydraulic control unit, 1 actuator
- Proportional control handles
- Rain visor
- Revolving frame undercovers, heavy duty
- Shoes, triple grouser, 28"
- Sun visor
- Straight travel pedal
- Track roller guards, full length
- Working light, front, two additional cab mounted
SUPPORT YOU CAN COUNT ON
MY KOMATSU
Access and manage all your machine telematics data, parts manuals, service manuals, software and parts ordering information from a single source anywhere, anytime.
Financing
Financing can be a major advantage for your operation, enabling you to get the equipment and service you need with terms to fit your balance sheet. Take advantage of competitive and flexible financial tools with Komatsu financing.
Warranty Programs
Experience the peace of mind that comes with Komatsu’s warranty. Komatsu offers a standard warranty on all machines — plus extended coverage options that help extend the life of your investment.